Due to an error in the firmware produks Seagate Barracuda hard drive, the Seagate finally admitted that there is a defect on the Barracuda 7200.11, Diamond Max 22 and the Barracuda ES.2 SATA hard disk that can make can not be accessed on the host system when activated.
According to the experience of some users, will still tend to be hard for 30 seconds at the time of I / O transfer streaming video, or at the time to read the file with a low speed.
After the hard disk to crash, the data can not be fully accessible, according to the Seagate Knowledge Base, although the data is still there in hard drive
Drive firmware bug that infected this created in December 2008. If you want to make sure, if you have disabled hard disk firmware like this, you can check the hard drive serial number, model and firmware revision through the list of the infected hard drive to the site: http:// Seagate.custkb.com / Seagate / CRM / selfservice / search . jsp? DocId = 207931.
You select the type of property in accordance with your hard disk.
Seagate promises to provide free in the recovery site: http://www. Seagate.com / www / en-us / about / contact_us /
